LAUDA
Additional
Devices

  • Immersion Coolers
  • Through-flow Coolers

Immersion Coolers

LAUDA through-flow coolers and immersion coolers are used as add-on devices to cool heating thermostats or any type of bath below ambient temperature. The preferred use of through-flow coolers is the use in conjunction with heating thermostats and integration into the cooling circuit.

LAUDA immersion coolers provide a quick way to extend the temperature range downwards when used in conjunction with heating thermostats, water baths and cooling traps. The thermostats work on the classical principle of direct evaporation, and the flexible hose connection means that they can be used without any problems. The ETK 50 even has adjustable temperature control.

  • Compact space-saving construction
  • Carrying handles for easy transport
  • Cooling coil made from high-grade stainless steel
  • Flexible tube connection with special insulation (length 1.5 m)
  • Temperature range -50…20 °C

Download a PDF of our Additional Devices brochure:

LAUDA Additional Devices Brochure (784 KB)

Working Temp Min.

Working temperature min.

-50°C

Working Temp Max.

Working temperature max.

20°C

Select up to 3 products to compare:
Compare Products
Technical features ETK 30 ETK 50
Select to compare:
Working temperature min. °C -30 -50
Working temperature max. °C 20 20
Temperature stability ±K 0.50
Cooling output at 20 °C kW 0.15 0.25
Cooling output at -10 °C kW 0.13 0.25
Cooling output at -30 °C kW 0.04 0.20
Cooling output at -40 °C kW 0.01 0.10
Cooling output at -50 °C kW 0.04
Cat. No. 230 V; 50/60 Hz L001958 on request
Summary
Summary

Through-flow coolers

LAUDA through-flow coolers upgrade any type of heating thermostat with pump connections to a high-quality cooling thermostat and thus allow working below ambient temperature. Through-flow coolers replace cooling with tap water that is expensive and ecologically not recommandable. They provide a constant flow and temperature of cooling supply regardless of the variations. Therefore, it is possible to ensure optimum temperature stability over the entire period and allow reproducible temperature conditions at any time.

  • Air-cooled, fully hermetic and thus absolutely maintenance-free cooling aggregates with heat exchangers in reasonable dimensions.
  • Heat exchangers are made from stainless steel.
  • All refrigerated parts inside the through-flow cooler are perfectly insulated. Therefore no condensation of water or risk of corrosion.
  • Low-noise emissions
  • Temperature range -40…150 °C

Download a PDF of our Additional Devices brochure:

LAUDA Additional Devices Brochure (1 MB)

Working Temp Min.

Working temperature min.

-30 °C

Working Temp Max.

Working temperature max.

150 °C

Select up to 3 products to compare:
Compare Products
Technical features DLK 10 DLK 25 DLK 45 DLK 45 LiBus
Select to compare:
Working temperature min. °C -15 -30 -40 -40
Working temperature max. °C 150 150 150 150
Cooling output at 20 °C kW 0.22 0.33 1.10 1.10
Cooling output at 0 °C kW 0.20 0.28 0.95 0.95
Cooling output at -10 °C kW 0.10 0.25 0.85 0.85
Cooling output at -20 °C kW 0.22 0.75 0.75
Cooling output at -30 °C kW 0.20 0.55 0.55
Cooling output at -40 °C kW 0.30 0.30
Cat. No. 115 V; 60 Hz L001975 L001976
Cat. No. 208-220 V; 60 Hz LFD 809 LFD 811
Summary
Summary
Summary
Summary